Lavina Double PCD for Epoxy Glue Removing (LVPCD-Q2L)
Superabrasive’s PCD (Polycrystalline Diamond) tools are designed for aggressive stock and coating removal and are offered with the same QuickChange attachment as the standard metal bond QC tools. Please note that the PCD tools are directional specific and you should check the direction of rotation of the grinder heads. All Lavina machines WITH THE EXCEPTION OF PROPANE MODELS require standard right-hand rotation tools. LAVINA propane grinders require PCD tools with LEFT-hand rotation – those can be easily distinguished by their blue color.
PCD tools WITHOUT Sacrificial bars or Metal Bond Button are the most aggressive style and will leave a very coarse profile on the concrete underneath. These are suitable for removal of:
• Thick mastics and glues
• ¼” Thick Parking Deck Membranes
• 30 mils and up Epoxy Coatings
• Thick Elastomeric Membranes
• Any coating with silica sand broadcast mixed in
PCD tools WITH Sacrificial bars or Metal Bond Button are designed to remove coating over a surface equal to a troweled surface and will not damage the concrete. The sacrificial bars or the metal button act as a stabilizer and depth guide, and reduce the gauging of the floor caused by the aggressive pcd segments. These tools are suitable for removal of:
Medium to thin mastics or glues
Failing epoxy coatings (30 mils or less)
Superabrasive’s QUICK CHANGE METAL BOND TOOLS can be used for coating removal of thin, old, dried glues, 20 mils or less- epoxy coatings, floor paints, cure-n-seals, etc.
1.PCDs with a metal button or sacrificial bars are less aggressive and are designed for thin coating removal.
2.PCDs without a metal button or sacriﬁcial bars are very aggressive and designed for thick coating removal. They will leave a very coarse proﬁle on the concrete.
3.Important: PCD tools are direction speciﬁc. Always check the direction of rotation of the grinding heads.