Use burnishing pads after the final resin grit (1500–3000) to polish the densified surface to a deep, water-resistant gloss. They work by friction — running at higher RPM on a clean, densified floor to close the surface and enhance clarity, much like buffing a car.
| Situation | Use Burnishing? | Why |
|---|---|---|
| After 3000-grit polish | Yes | Deepens the gloss |
| Dull maintenance floor | Yes | Restores sheen fast |
| Before sealing | Yes | Improves sealer clarity |
| On un-densified floor | No | Won't hold the gloss |
A:No. Burnishing enhances the gloss on an already-polished, densified floor. It cannot remove scratches or build a finish from a rough surface.
A:Light burnishing every 1–3 months maintains the gloss between full polishing cycles, depending on traffic.
A:Yes — burnishing is commonly used on terrazzo and some stones after polishing to boost gloss and clarity.
Burnishing is the final step that turns a polished floor into a showroom gloss. Pair it with a quality polished base from the Diamond Resin Polishing Pads for Concrete & Terrazzo Floor (JOY-RFP-01) or 8 Triangles Diamond Resin Floor Polishing Pads (JOY-RFP-03), then finish with the Burnishing Pads for Concrete Floor Polishing (JOY-RFP-BP2) for a durable, mirror-like shine.
