Quick Answer

Polish toe kicks and tight cabinet edges with small 3-inch pads on a hand grinder or oscillating tool, working the same grit sequence as the main floor. Protect the cabinets with tape, vacuum between grits, and feather the edges into the field.

Key Features of Edge Polishing

• Small format pads: 3-inch and hand pads reach toe-kick height and tight corners.
• Protection: tape cabinet faces and door bottoms to prevent slurry damage.
• Same sequence: match the floor's grit progression so the edge blends.
• Dust control: use a vacuum attachment in confined areas.

How to Choose the Right Tool

Area	Tool	Pad
Toe kick (low gap)	Hand grinder, low angle	3-inch pads
Cabinet sides	Angle grinder with guard	3-inch pads
Corners	Oscillating tool or hand pads	Hand pads

How to Use It

• Mask the cabinet bottoms and floor transitions with tape.
• Grind the toe-kick surface with coarse metal only if it is uneven.
• Step through 3-inch resin floor polishing pads matching the field grits.
• Feather the last pass beyond the edge so the finish blends into the floor.

Frequently Asked Questions

Q: Do toe kicks need full polishing?

A: Yes — match the floor finish or the gap will be visibly duller. Small pads make it practical.

Q: Can I use a floor machine near cabinets?

A: No — the guard blocks access. Use hand tools and small pads in confined areas.

Q: How do I avoid slurry getting under cabinets?

A: Tape the gap and clean up slurry immediately with a damp cloth and vacuum.

Conclusion

Edges sell the job. Use 3-inch resin pads on hand tools, protect the cabinetry, and match the field sequence so toe kicks blend perfectly.