Quick Answer

Yes, you can score and snap most concrete pavers up to 80 mm thick — score a 2-3 mm deep line with a diamond blade on an angle grinder, place the scored line over a thin fulcrum (a 25 mm dowel or pipe), and press down evenly on both sides. It works best on standard paving bricks and 50-60 mm pavers. For thicker, reinforced or interlocking pavers, use a wet saw for a clean cut.

When Score-and-Snap Works

Paver Type	Score-and-Snap?	Alternative
Clay brick, 50-70 mm	Excellent	—
Concrete paver, 50-60 mm	Good	Wet saw for finished edges
Thick slabstone, 80-120 mm	Spotty	Wet saw
Reinforced / interlocking paver	No	Block saw

Step-by-Step

1. Mark the cut line with a pencil and straight edge.
2. Use a diamond turbo or segmented blade on an angle grinder; score 2-3 mm deep along the line, guiding on a straight rail.
3. Turn the paver over and score the back side too — this reduces chip-out.
4. Place the paver over a 25 mm dowel aligned under the score line.
5. Press down evenly on both sides with the palms of your hands. It should snap cleanly.
6. Dress the edge with a grinder if needed.

A general-purpose turbo dry blade scores pavers fast; for a perfectly straight cut every time, the turbo mesh blade leaves a clean scored line.

Safety Tips

• Wear eye protection — pavers snap with force and throw chips.
• Dry score creates silica dust; use a dust extractor or do it wet.
• Don't try to snap a paver that doesn't break cleanly — score deeper and try again.

Frequently Asked Questions

Q: How deep should the score be?

A: About 1/5 of the paver thickness. For a 60 mm paver, score 2-3 mm deep on both sides.

Q: Can I score and snap porcelain pavers?

A: Porcelain is too hard and brittle — it shatters unpredictably. Use a wet rail saw.

Q: Why does my paver crack sideways?

A: Score too shallow, or the fulcrum isn't exactly under the score line. Deepen the score and align carefully.

Q: Do I need water?

A: Not for scoring a few pavers, but use dust extraction. Wet sawing is cleaner and extends blade life.

Conclusion

Score-and-snap is a fast way to cut brick and thin pavers without a wet saw. Browse our turbo and segmented blade range for 4" and 4.5" angle grinder blades.