Average response time: under 24 hours

Store steel grinding plates in a dry, heated area, wipe them with a light film of oil or anti-rust spray, stack them flat on wooden pallets, and keep silica dust off them. Humidity above 60% is what actually causes rust on the steel core, not the diamonds themselves. A few minutes of storage prep at the end of a job extends the life of every set.
The diamond segments are welded to a steel core. Rust on the core does not affect the diamonds directly, but it weakens the weld, makes the plate hard to release from the holder, and looks unprofessional in front of customers.
Our R3 round-segment shoes ships with a light rust-preventive oil film; wipe it off before first use.
Browse the full range in our concrete grinding discs category.
Yes, for a few days. For weeks or months, remove, clean, and oil.
No. The diamonds are brazed or welded to the segment; surface rust on the core is cosmetic until it reaches the weld.
Once a month in humid climates. Look for orange rust at the weld line.
Five minutes of cleaning and oiling saves a set of plates from rust. Store indoors, stacked flat, away from slurry. contact JOY TECH for replacement plates if your current set is beyond recovery.

Double PCD Double Round Segment Diamond Grinding Tools for Scanmaskin (JOY-SC-PCD2R2)
View specs →
Triple PCD Diamond Trapezoid Grinding Disc with Single Round Segment (JOY-TP-PCD3R1)
View specs →
Triple PCD with Single Round Segment Diamond Grinding Disc for Husqvarna (JOY-HQ-PCD3R1)
View specs →Need this tool for your job?
MOQ 1 · 7–30 days by order quantity · FOB & CIF · free sample on request
Written and reviewed by JOY TECH — an SGS & BV audited, CE/RoHS certified diamond tools manufacturer founded in 2004, exporting to 50+ countries.
Our factory and QMS are audited by SGS and Bureau Veritas. Products meet CE/RoHS requirements and every piece is 100% inspected before packing.
Verified Certificates