Average response time: under 24 hours

Strip industrial paint and sealers with PCD diamond tooling, not metal bond. PCD shears epoxy, polyurethane, and acrylic sealers off in sheets. Expect 200-500 m2 per day on a push grinder, then follow with a 30/46 metal-bond cleanup pass to profile the slab for the new coating.
A metal-bond disc tries to grind through sealer, but the resin softens and loads the segment. PCD (polycrystalline diamond) does not soften: it chips and peels the coating. Our Redi-Lock PCD discs is built for this exact job.
| Coating | Thickness | PCD rate (m2/hr) |
|---|---|---|
| Acrylic sealer | thin | 40-60 |
| Epoxy paint | 100-300 microns | 25-40 |
| Heavy epoxy build-up | 1-3 mm | 10-20 |
| Polyurethane topcoat | thin | 30-50 |
Browse concrete grinding discs category for PCD and metal-bond sets.
For small rooms, yes. For a 500 m2 plant floor, grinding is faster and avoids chemical disposal.
No. PCD removes the coating, not the concrete. It leaves a light scratch that metal bond cleans up.
When you see uniform gray concrete instead of coating color.
Industrial sealer removal is a PCD job. Strip, cleanup, vacuum, then re-coat. contact JOY TECH for PCD discs sized to your grinder.
Before choosing tooling, identify what you are removing: acrylic, epoxy, polyurethane and build-up layers each load PCD discs differently, and a coating test patch tells you the real rate faster than any chart. Expect the first hour on a new floor to be slow while the disc bites in, then the rate stabilizes. After stripping, run the metal-bond cleanup pass immediately — left-over sealer residue re-hardens and becomes harder to remove. Keep a clean record of which disc worked on which coating, so the next similar floor can be quoted accurately. When a coating behaves unexpectedly, send a small sample to the tooling supplier for identification before committing a whole disc set.

Husqvarna Redi Lock PCD Diamond Grinding Disc for Epoxy Floor (JOY-HQ-PCD2A2)
View specs →
Husqvarna 9 PCD Diamond Grinding Disc for Coating Removal (JOY-HQ-PCD9)
View specs →
Triple PCD Husqvarna Diamond Grinding Disc for Epoxy Floor (JOY-HQ-PCD3)
View specs →Need this tool for your job?
MOQ 1 · 7–30 days by order quantity · FOB & CIF · free sample on request
Written and reviewed by JOY TECH — an SGS & BV audited, CE/RoHS certified diamond tools manufacturer founded in 2004, exporting to 50+ countries.
Our factory and QMS are audited by SGS and Bureau Veritas. Products meet CE/RoHS requirements and every piece is 100% inspected before packing.
Verified Certificates