Quick Answer

Use a dedicated sintered-surface blade with a thin kerf, hard bond and reinforced or silent core, run wet at the blade's rated RPM. Sintered surfaces like Dekton are extremely hard and non-abrasive, so a general stone blade will glaze and overheat.

Why Dekton Is Different

• Very hard, compact surface that dulls ordinary blades fast.
• Low abrasiveness — the bond must stay aggressive or it glazes.
• Thin slabs — a thin kerf blade reduces waste and chipping.
• Heat builds quickly — water cooling is essential.

How to Choose the Right Blade

Feature	Why It Matters
Thin kerf	Less waste, less heat, cleaner edge
Hard bond	Holds diamond against hard sintered surface
Reinforced / silent core	Stable at speed, quieter, less vibration
Dedicated rating	Designed for Dekton / sintered, not general stone

How to Use It Correctly

• Always cut wet with good water flow.
• Run at the rated RPM — never slow, or the blade glazes.
• Feed steadily with light pressure to avoid chipping the edge.
• Use a straightedge guide for long cuts.

Frequently Asked Questions

Q: Can I cut Dekton with a granite blade?

A:Short cuts only. Sintered surfaces glaze granite blades quickly; a dedicated blade is much safer.

Q>Do I need a special machine for Dekton?

A:No — a standard stone saw or bridge saw with the right blade and water works well.

Q: Why does my blade burn on sintered surfaces?

A:Usually the bond is too soft or the RPM too low — the blade rubs instead of cutting. Check both.

Conclusion

Invest in a blade made for sintered surfaces. The Dekton Saw Blade (Thickened Segment) — JOY-DK-TS with thickened segments, the Dekton Saw Blade (Silent Core) — JOY-DK-SC silent core or the Dekton Saw Blade (Normal Core) — JOY-DK-NC normal core cover Dekton cutting needs.