Average response time: under 24 hours


Category: POLISHING SOLUTIONS
JOY-FXP-412 | 4'' (100 mm), 10 mm, ZHANFU No.3 segment. Grit: 50#, 100#, 200#, 400#, 800#, 1500#, 3000#; 10#, 30#, 150#, 300#, 500#, 600#, 1000#, 2000#, 5000#. Dry polishing of granite, marble, man-made stone and concrete. The ZHANFU series uses a deep, aggressive segment for super-hard concrete and heavy machine work. It removes material quickly in the coarse stages while staying stable under high pressure. Velcro backing. OEM/ODM and custom colours available from JOY TECH.
Model: JOY-FXP-412
Diameter: 4'' (100 mm)
Thickness: 10 mm
Segment / Pattern: ZHANFU No.3 segment
Grit available: 50#, 100#, 200#, 400#, 800#, 1500#, 3000#; 10#, 30#, 150#, 300#, 500#, 600#, 1000#, 2000#, 5000#
Polishing method: dry
Application: granite, marble, man-made stone and concrete
Backing: Velcro (hook-and-loop) backing for angle grinders and floor grinders
The ZHANFU series uses a deep, aggressive segment for super-hard concrete and heavy machine work. It removes material quickly in the coarse stages while staying stable under high pressure.
4'' ZHANFU No.3 Concrete Polishing Pad is supplied by JOY TECH, an SGS and Bureau Veritas audited, CE/RoHS certified diamond tools manufacturer since 2004. Factory-direct pricing, bulk order support and OEM/ODM customisation are available.
Diamond polishing tools use resin-bonded diamond particles to progressively refine ground surfaces into a smooth, glossy finish. Applied in a sequence of increasing grit sizes from 50# to 3000#, these pads and discs transform rough concrete or stone into a reflective, low-maintenance surface. Polishing is the final stage of decorative concrete and stone restoration, producing the high-gloss floors seen in retail stores, warehouses, showrooms, and luxury residences.
| Bond Type | Resin-bonded / hybrid |
| Diamond Grit | 50# – 3000# polishing sequence |
| Backing | Hook & loop (Velcro) or magnetic |
| Working Surface | Concrete, marble, granite, terrazzo |
| Use Condition | Wet polishing recommended |
| Thickness | 3mm – 10mm working layer |
Start with a metal-bond 50# or 100# grit to flatten the floor, then transition to resin-bond pads at 200# or 400#
For standard gloss, follow 50→100→200→400→800→1500→3000#; for satin finish stop at 800#
Use densifier (lithium or sodium silicate) after 200# grit to harden the surface and improve polish clarity
Select pad diameter matching your machine — 3" for edge polishers, 17" for floor buffers, 20–27" for planetary polishers
A phenolic or epoxy matrix that holds diamond particles for polishing. Softer than metal bond, it conforms to surface irregularities and produces a fine finish.
The progressive order of diamond grit sizes used to polish a surface. Each finer grit removes the scratches left by the previous one, building clarity and gloss.
A chemical hardener (typically lithium silicate) applied during polishing that reacts with concrete to increase surface hardness and improve polish retention.
The ability of a polished surface to reflect images clearly. Measured in gloss units (GU), with 3000# polished concrete typically reaching 70–90 GU.
Start with 50# metal bond, then 100#, 200# resin, 400#, 800#, 1500#, and finish at 3000# for a high-gloss surface. Skip grits only if the previous scratch pattern is fully removed. Apply densifier after 200#.
Wet polishing produces a finer finish, reduces dust, and extends pad life, but requires water management. Dry polishing is faster and more convenient on job sites without water access. Resin pads work well in both conditions.
A resin pad typically covers 200–500 m² per grit step. Coarser grits (50–200#) wear faster than finer grits. Using water significantly extends pad life by 30–50%.
Common causes: skipping grit steps, insufficient passes at each grit, hardener not applied or not cured, or pads glazed over. Ensure each grit fully removes previous scratches, apply densifier after 200#, and dress pads if they stop cutting.
Yes, but outdoor polished concrete requires a penetrating sealer to protect from UV and weathering. Use a 800# finish (satin) rather than 3000# for better slip resistance outdoors.
Polishing uses diamond abrasives to physically cut and refine the surface. Burnishing uses a very fine abrasive or chemical to create a temporary surface shine that wears off. Polished concrete is permanent and requires no wax.
Every product is covered by a 12-month warranty against manufacturing defects in materials and workmanship. If a defect is confirmed, we replace the tool or refund the order — your choice.
Please inspect goods within 7 days of receipt. For any quality issue, send photos or a short video to our support team — we respond within 24 hours and settle replacements or returns promptly.
| MOQ | 1 pc — sample and trial orders accepted |
| Lead time | 7–30 days depending on order quantity |
| Trade terms | FOB and CIF both supported |
| Samples | Free samples available on request (freight collect) |
| Packaging | Standard export packaging, or customised to your requirement (custom packaging requires a higher MOQ) |
Written and reviewed by JOY TECH — an SGS & BV audited, CE/RoHS certified diamond tools manufacturer founded in 2004, exporting to 50+ countries.
Our factory and QMS are audited by SGS and Bureau Veritas. Products meet CE/RoHS requirements and every piece is 100% inspected before packing.
Quotes sent by contractors in Germany, Australia and Poland after running our tools on real jobs. Names withheld at their request.
“Unparalleled and vastly superior to what Australian suppliers have been giving us. They run true and balanced, cut as they should, with high diamond concentration evenly distributed — the price/quality is hard to beat.”
“1,700 m² done with your blades and they are not worn out yet.”