Average response time: under 24 hours
A polished concrete floor stays new-looking with three habits: dust-mop daily, clean with a pH-neutral floor cleaner once a week, and burnish or re-polish once or twice a year. Avoid acidic cleaners, steel wool, and abrasive pads — they dull the gloss. For daily traffic, a dry dust mop removes the grit that causes micro-scratches, and a yearly pass with burnishing pads restores the shine without a full re-polish.
| Situation | Action | Frequency |
|---|---|---|
| Normal retail/office traffic | Burnish with resin pads | Every 6–12 months |
| Heavy industrial traffic | Re-polish 400→800→1500 grit | Every 1–2 years |
| Dulled or hazy surface | Densifier + re-polish 800–3000 | As needed |
Use burnishing pads for concrete floor polishing for gloss restoration and diamond resin polishing pads for annual re-polish passes. A neutral floor cleaner matched to the floor finish is the single most important product you buy.
A: A microfiber mop is fine, but the detergent must be pH-neutral. Standard dish or floor soaps leave a residue that dulls the gloss over time.
A: No. Polished concrete is densified and polished to a gloss without wax. Waxing is optional for extra protection on commercial floors but is not required.
A: Light-traffic floors every 6–12 months; warehouses and showrooms every 3–6 months. Burnishing is fast — a single pass with resin pads restores most of the gloss.
Long-term polished concrete maintenance is simple: remove grit daily, clean weekly with pH-neutral products, and burnish or re-polish yearly. With the right pads, your floor keeps its mirror finish for decades.
