Quick Answer

Use segmented blades for concrete, masonry and stone where speed and cooling matter; use continuous rim blades for tile, marble and porcelain where a clean, chip-free edge matters. A turbo rim is the middle ground — a continuous edge with a serrated profile for faster cutting in stone.

Key Differences

Factor	Segmented	Continuous Rim
Cut speed	Fast	Slower
Edge quality	Good, can chip soft stone	Clean, chip-free
Cooling	Excellent (gullets)	Lower (needs water)
Best for	Concrete, brick, stone	Tile, marble, porcelain

How to Choose

• Cutting tile, marble or porcelain → continuous rim (wet).
• Cutting concrete, brick or block → segmented (dry or wet).
• Granite and hard stone → turbo rim or segmented with a hard bond.
• Deep cuts and fast production → segmented blades with wide gullets.

How to Use It Correctly

• Continuous rim blades should generally be used wet to keep the rim cool.
• Segmented blades can run dry for short cuts but run cooler wet.
• Match the blade diameter to the machine's maximum RPM.
• Feed evenly — forcing either type causes chipping and wear.

Frequently Asked Questions

Q: Can I cut tile with a segmented blade?

A: You can, but the edge is more likely to chip. A continuous rim blade gives a clean cut on tile and porcelain.

Q: What is a turbo rim blade?

A: It is a continuous rim with a serrated edge — cleaner than segmented, faster than plain continuous. Good for stone.

Q: Can continuous rim blades cut concrete?

A: Light concrete yes, but they overheat and wear fast. Use segmented for concrete.

Conclusion

Segmented for concrete and masonry, continuous rim for tile and marble. For clean marble cuts, the Marble Saw Blade (Straight Slot) — JOY-MS-ST is a continuous-style choice; for harder stone, the Arix Stone Saw Blade — JOY-ARX handles speed and edge quality.