Quick Answer

In bulk, diamond saw blades typically run from $2.50 per piece for 105-125 mm handheld blades up to $250-$900 per piece for 1,000-1,600 mm walk-behind blades. As indicative FOB China figures: 230-350 mm concrete blades cost $8-$25, 400-500 mm blades cost $25-$70, and 600-900 mm blades cost $70-$220. The price is driven mostly by diameter, segment bond, welding method and order quantity; MOQs start at 10-50 pieces for stock diameters and 100-500 pieces for custom bonds or private label.

What Drives Diamond Saw Blade Pricing

• Diamond grit grade and concentration - better diamond cuts longer and costs more per segment.
• Segment bond - a bond matched to green, cured or reinforced concrete costs more than a generic bond.
• Welding method - laser welding costs more than high-frequency brazing but survives rebar and deep cuts.
• Steel core - 65Mn, 75Mn and higher alloy cores stay flat; thin, soft cores are cheaper but wander.
• Diameter and rim type - segmented, turbo, continuous-rim and silent cores carry different price levels.
• Application - asphalt blades need soft-bond, friction-resistant segments; stone blades need granite- or marble-specific bonds.
• Order quantity, private label packaging and documentation add a few percent and move the per-piece price most.

Indicative Bulk Price Ranges by Diameter

These are indicative ranges only; final pricing depends on bond, core spec, packaging and your destination country.

Laser-Welded vs High-Frequency-Welded: The Price Difference

Welding method is the biggest spec lever after diameter. Laser-welded segments are fused to the core with a deep weld that survives high RPM, wet cutting and rebar impacts; high-frequency welded (brazed) blades cut well on general concrete but cost roughly 15-35% less per piece. The Concrete and Asphalt Saw Blade (Laser Welded) - JOY-CA-LW sits at the mid-high price tier, while the Concrete and Asphalt Saw Blade (High Frequency Welded) - JOY-CA-HF is the value tier for crews that cut mainly cured, unreinforced concrete.

Quantity Breaks and MOQs

How to Get an Accurate Bulk Quote

• Send exact diameters, bore sizes and the saw models they fit (handheld, walk-behind, road saw).
• State what you cut: cured or green concrete, reinforced with rebar, asphalt, granite or marble.
• Use the bond grade the supplier recommends for that material, not the cheapest bond code.
• Ask for the price at 50, 200 and 500 pieces in one quote, plus FOB and CIF terms.
• Order one or two sample blades before a container; the sample cost is small insurance against a wrong bond.

Frequently Asked Questions

Q: What is the minimum order for diamond saw blades?

A: Stock diameters usually start at 10-50 pieces per SKU. Custom bonds, private label logos or special segment layouts typically need 100-500 pieces to cover tooling and setup.

Q: Why is one 350 mm blade quoted at $10 and another at $30?

A: The difference is usually diamond grade, bond design and welding: a laser-welded, reinforced-concrete blade costs more than a high-frequency-welded general-purpose blade - and it lasts longer on real work.

Q: Are bulk prices FOB or CIF?

A: Factory quotes are normally FOB Xiamen. You can ask for CIF or DDP to your port; freight, insurance and import duties change the landed cost significantly.

Q: Can I mix diameters in one bulk order?

A: Yes. Factories like JOY TECH combine several diameters and bond codes in one container, which helps distributors reach practical MOQs without overstocking a single SKU.

Conclusion

Bulk diamond saw blade pricing is a function of diameter, bond, welding and quantity - compare those four before comparing numbers. Send JOY TECH your blade diameters, saw models and the material you cut; the factory will quote laser-welded and high-frequency options like the Laser Welded High Horsepower Blade - JOY-LW-HH and, for special stone work, the ARIX Ordered-Segment Diamond Ring Saw Blade (JOY-ARX-RS) with quantity breaks and samples so you can lock a price that fits your jobs.